PAKINFO360

Intel D945gcl is the Desktop Motherboard with 800 MHz FSB. It supports up to 4 GB system memory of 533 and 667 MHz FSB. Intel D945gcl Desktop Motherboard can run Intel Desktop processors, dual core, and core 2 duo processors. It has two slots of PCI, one X 16 slot of PCI Express 2.0 slot, 4 connector of SATA hard drive, one for IDE, 4 back and 4 font USB connectors and 2 slots of RAM memory. It can support up to 3.8 GHz of Intel Desktop processor and up to 2.4 GHz of Intel Core 2 Duo Processors with 800 MHz FSB.

Specifications

Processor Support for the following:
• Intel Core 2 Duo processor in an LGA775 socket with a 1066 or 800 MHz
system bus
• Intel Pentium D processor in an LGA775 socket with an 800 or 533 MHz
system bus
• Intel Pentium 4 processor in an LGA775 socket with an 800 or 533 MHz
system bus
• Intel Celeron D processor in an LGA775 socket with a 533 MHz system bus
Memory
• Two 240-pin DDR2 SDRAM Dual Inline Memory Module (DIMM) sockets
• Support for DDR2 667, DDR2 533, or DDR2 400 MHz DIMMs
• Support for up to 4 GB of system memory
Chipset
Intel® 945G Chipset, consisting of:
• Intel® 82945G Graphics Memory Controller Hub (GMCH)
• Intel® 82801GB I/O Controller Hub (ICH7)
Video
Intel GMA950 onboard graphics subsystem
Audio
6-channel (5.1) audio subsystem with three analog audio outputs using the
Sigmatel* 9220 audio codec
Legacy I/O Control Legacy I/O controller for diskette drive, serial, parallel, and PS/2* ports
USB
Support for USB 2.0 devices
Peripheral Interfaces
• Eight USB ports
• One serial port
• One parallel port
• Four Serial ATA interfaces
• One Parallel ATA IDE interface with UDMA 33, ATA-66/100 support
• One diskette drive interface
• PS/2 keyboard and mouse ports
LAN Support 10/100 Mbits/sec LAN subsystem using the Intel® 82562G Platform LAN Connect
(PLC) device
BIOS • Intel® BIOS (resident in the SPI Flash device)
• Support for Advanced Configuration and Power Interface (ACPI), Plug and Play,
and SMBIOS
Expansion
Capabilities
• Two PCI Conventional* bus connectors
• One PCI Express* x1 bus add-in card connector
• One PCI Express x16 bus add-in card connector
Other Features
• Support for PCI Local Bus Specification Revision 2.3
• Support for PCI Express Revision 1.0a
• Suspend to RAM support
• Wake on PCI, RS-232, front panel, PS/2 devices, and USB ports
Hardware Monitor Subsystem
• Hardware monitoring and fan control ASIC
• Voltage sense to detect out of range power supply voltages
• Thermal sense to detect out of range thermal values
• Three fan headers
• Three fan sense inputs used to monitor fan activity
• Fan speed control